Colorado Aviation Accidents & Incidents

Learn from Colorado's accident history to fly safer in the Rockies

2310 Total Accidents 425 Fatal 816 Fatalities 1982-2026
← Back to all accidents

Silt, Colorado

January 31, 2021 · NTSB CEN21LA119 · CESSNA 172 (N4376Q)
Serious Injury
Note: This analysis may be based on NTSB preliminary reports, which represent an initial, incomplete investigation. Facts can change as the investigation progresses, and preliminary findings should not be assumed to be accurate or final. For older events, a final NTSB report may have been issued — always consult the NTSB Aviation Query for the authoritative record.

NTSB Narrative

On January 31, 2021, about 1420 mountain standard time, a Cessna 172, N4376Q, was destroyed when it was involved in an accident near Silt, Colorado. The pilot and two passengers sustained serious injuries. The airplane was operated as a Title 14 Code of Federal Regulations (CFR) Part 91 personal flight.

A passenger’s family member reported that the purpose of the flight was to take some friends’ children flying in the local area. The family member stated that, while expecting the airplane to return for landing, he received a call from the mother stating that they had crashed.
 
The main wreckage was located about 3 miles east of the departure airport in an area of rising terrain. The debris field began about 25 ft past a set of high-tension transmission wires and extended about 670 ft. The upper 2 ft of the vertical stabilizer and rudder were located about 75 ft from the beginning of the debris field. The initial ground scar was located about 475 ft past the transmission wires and was identified by a damaged tree and sheet metal consistent with the color of the airplane. The main wreckage came to rest inverted about 600 ft past the wires.

A post-accident airframe examination revealed that the lower portion of the vertical stabilizer and rudder remained attached to the fuselage and exhibited damage consistent with an impact with a wire. The vertical stabilizer leading edge was deformed aft in a U-shaped direction with metal polishing and black paint transfer. Flight control continuity was established to the ailerons, elevators, and rudder, and the flaps were found in the retracted position. Internal continuity was established throughout the engine and valve train. All cylinders were examined with a borescope with no anomalies noted. No mechanical anomalies or malfunctions were found that would have precluded normal operation.

A cell phone video recording taken by a passenger from inside the airplane showed the airplane flying at low altitude, followed by an upset event and the subsequent impact sequence. The video did not capture a continuous forward view out of the cockpit windows.

The pilot’s failure to avoid powerlines while flying at low altitude.

Case Study & Lessons Learned

Generating educational case study...

NTSB Findings

  • Environmental issues-Physical environment-Object/animal/substance-Wire-Awareness of condition
  • Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot

Details

NTSB ReportCEN21LA119
AircraftCESSNA 172
RegistrationN4376Q
DamageDEST
FAR Part091
Location39.5198, -107.6667
Corporate Sponsor
McAir Aviation
McAir Aviation
All Classifieds Post an Ad